

0A sulfuric acid tanker is a dedicated tank semi trailer built to haul one of the most aggressive industrial liquids by road without leaks, corrosion failures, or cargo contamination. Buyers face a narrow set of risks: the wrong tank material for a given acid concentration, welds that crack under vibration, and discharge systems that seize after a single season. Purpose-built units answer these with compatible tank bodies, fully inspected welds, and sealed valve trains. Capacities in this range run from 20 to 70 cubic metres with 2 to 4 axles and elliptical or circular tanks, serving chemical plants, petrochemical firms, hazardous material logistics operators, and industrial raw-material distributors.
Build quality, not just capacity, decides whether a sulfuric acid tanker survives years of corrosive service. Critical welds should receive full radiographic inspection, and robotic pulse MIG welding with argon shielding on both sides gives consistent seams that manual work cannot match. Tank material is matched to the actual acid concentration, temperature, and impurity level — stainless steel tanker bodies in 316 suit many conditions but cannot be assumed right for every load, so engineering review comes before production. As a chemical tanker trailer maker, our workshop runs shearing and bending machines, frame robot welding, and an electrophoresis powder coating line. Related liquid cargo bodies are covered on our fuel tanker trailer range.
Every sulfuric acid tanker is configured around the cargo, the route, and the rules that govern hazardous transport.
Tank volumes span 28,000 to 70,000 litres, with payloads from 28 to 70 tonnes and 2 to 4 axles rated at 13 to 20 tonnes each. A tri axle layout balances load and road stability on long hauls. See the tri axle sulfuric acid trailer for a worked specification.
Tanks split into multiple compartments with 1 to 9 manholes of 500 mm diameter, each with a vent valve, so several grades move without mixing. Discharge uses a 4-inch API adaptor or 3-inch spherical valve, plus 3 or 4-inch pneumatic bottom valves. Overfill recovery and bottom loading are available as options.
Every critical weld undergoes 100% radiographic inspection, and argon-shielded double-side welding with robotic pulse MIG keeps seams consistent across the tank. Emergency shut-off valves and anti-overflow systems protect the load and the driver. This inspection discipline is what separates a certified sulfuric acid tanker from a converted general tank.
Lengths from 9,500 to 13,000 mm are built to order, and painting follows the customer's specification. A 20 cubic metre stainless steel acid tanker model rated for 98 percent acid shows how tank material, valves, and safety gear are matched to the medium. Engineering drawings are confirmed before production starts.
Qingdao Cimceco Vehicle, operating as Rhinox Vehicle, has spent over 30 years in special vehicles and ships around 8,000 units a year from a 146,666 square metre plant. Annual production capacity exceeds 300,000 units, and products reach more than 40 countries with 4,000 companies already served. The factory runs frame robot welding, laser cutting, and an electrophoresis powder spraying line, giving consistent build quality across tank bodies and chassis. Buyers can review the Rhinox factory profile before placing an order. Technical teams confirm acid concentration and material compatibility in writing, so each trailer is built for the actual cargo rather than a generic specification.